Ridge Riser® « TRA-MAGE, Inc. Roof

ITEM

Ridge Riser®

HEIGHT

Adjustable for different tile profiles

DESCRIPTION

Designed for concrete or clay tile roofs
Pre-scored bend lines for adjustable height and slope
Designed for 2x2 Hip and Ridge boards
Elevates the nailing board for proper ventilation
Easy application for hip and ridge tiles

MATERIALS

16 ga. galvanized steel

COLOR/FINISHES

Galvanized Steel

STEP A

The Ridge Riser® is attached to the 2x2 first. It is applied on two foot centers. Fastener is only required on one side.

STEP B

Bend Ridge Riser® out at bending line for appropriate tile profile.

For low profile tile use the top bending line on each side.
For medium profile tile use second bending line on each side.
For high profile tile use bottom bending line on each side.

Nail to deck or raised counter batten with two roofing nails on each side. On high profile tile add a 1x2 on top of the 2x2 on all hips. It is not necessary to nail ridge riser into the rafters.

3D Image
Spec Sheet

PRODUCT IMAGES

[Show as slideshow]

PRODUCT INSTALLED